国产安检门 金属探测安检门 金属探测器 手持金属探测器 进口安检门 Ceia意大利启亚 Metor美国麦特瑞克 Garrett美国盖瑞特 行李包裹检查 X光行李安检机 车辆安全检查 车底检查镜

意大利启亚CEIA品牌PDM2进口安检门中英文参数表

本文为意大利启亚PDM2型号CEIA品牌进口安检门中英文参数简略翻译信息,仅作参考,关于PDM2型号安检门的准确信息请参考产品信息页面:CEIA PMD2意大利启亚圆柱形高端进口安检门,以产品信息为准。

简短介绍:
意大利启亚CEIA品牌PDM2 Plus型进口安检门采用了高端的金属探测原理,即使安全级别设置为高,其先进的金属探测技术也不会受到干扰,PDM2 PlusCEIA安检门是针对行李物品及人体安检检测设计的,能检测到因为高速通过速率带来的安检漏洞。

主要特征:
高级检测和吞吐量
认证最严格的安全标准
无与伦比的可靠性和零维护
10分钟安装
外形设计版本:椭圆柱的形状或传统面板
可动态检测1/2大小的刀片等危险性对象
拥有非常好的抗电磁干扰能力,减少安检过程误报和漏报率
高达60个左/右显示区位
高金属识别技术
高精度双向计数器自动复筛补偿
SweepScan4D技术减少干扰警报
芯片卡功能,可快速、简便、安全的编程
0%至99%随机报警可编程能力
先进的抗电磁干扰能力
一键自动安装
内部低电压处理增强安全性能
标准接口:RS- 232,蓝牙,红外线接口
可供网络接口选择:以太网,USB 

高级检测:
能够检测的最大范围威胁对象,无磁性和混合组成的金属合金
认证最严格的安全检测标准
针对60区位的高分辨率和精度:垂直20区位*三个水品区位
金属威胁成分鉴定功能, PMD2 Plus是世界上第一台具备金属身份检测技术的金属安检门,对金属的成分具有分辨能力,还可以探测到金属所在的区位。

无与伦比的吞吐量:
尖端检测技术可排除个人行李物品的非威胁性金属物品,增强安检效率。
四维扫描检测系统提供了统一的检查范围,可对不具备威胁的金属物品大小忽略不计,增强安检的吞吐量。 

先进的报警指示功能:
四个多区域的指示灯显示每一件金属物品所在范围。
灵活的声音报警信号系统:10声连续和脉冲铃声及34声的特别报警声音。
10声强度级别从090可编程1分贝/米。
高精度的计数器:进出通过人数计数,报警率,自动复筛补偿消除错误。

超过40个内置的安全程序:
超过40个内置的安全程序:通过22个国际标准,可定制的水平高达20个。
芯片卡系统可快速、简便得设置安全参数(即报警音量和音调,反阅读等..)和选择安全级别。
使用高强度报警概率与随机选择的安全标准。

 10分钟的自动安装:
行业最先进的外部因素的干扰免疫应答计数,具备最好的抗干扰能力。
安装方便简单, PMD2 Plus进口安检门是世界上最易安装的金属探测门,10分钟即可安装完成。
自诊断功能,确保连续一致的检测性能。

突破性:
企业级用途集合功能定位在低端价格。
从不需要校准或定期维修。

现代数字技术:
使用100%可增长使用寿命和性能稳定的数字元件。
定制设计的DSP分析仪具备更强的金属探测能力。

质量:
自我诊断系统
高度检测可靠性
无需校准
无定期维修
全数字化设计

通过时探测门结构:
设计最先进紧凑水洗板结构。
保护:防止老化,天气和磨损。

中央控制单元:
人体工程学设计。
高清晰显示效果和编程键盘字母数字显示器。
先进制造塑料(IP20保护程度)或不锈钢(AISI304 IP65保护程度)。
访问前面板由硬件密码保护。

报警信号:
可见信号:
多区域的信号显示栏
4款软件可操作和显示可逆方向和速度指示灯
绿色和红色计量信号正比于物体的质量检测

声音信号:
高强度的报警信号声
10声连续和脉冲调加34声特殊提示音
10米范围从090分贝声音强度

安装数据:
自动同步多台的金属探测门信号,在相邻安检门间距大于15厘米情况下无需外部电缆连接。
内置地板灵敏度调节功能。

Brief introduction
The PDM2 Plus is a zonal Metal Detector characterised by excellent discrimination towards metal personal effects, even when set to high security levels. Thanks to its advanced technology, the PDM2 Plus is a Metal Detector which allows accurate pinpointing of weapons in transit and a high flow rate.

Main features:
Superior Detection and Throughput
Certified to the strictest Security Standards
Unmatched Reliability & Zero Required Maintenance
10 minute Installation
Enterprise Class Performance at Entry Level Pricing
Elliptic column shape or traditional panel versions available
Dynamic threat object detection range from guns to ½ cutter blade
Discrimination of personal effects with a very low nuisance alarm rate
60 zones with left and right indication
Met-Identity technology identifies the metal type in real time
High precision bidirectional counter with automatic rescreening compensation
SweepScan4D to allow an uniform inspection field and reduce nuisance alarms
Chip Card capability for fast, simple, and safe programming
Random alarm capability programmable from 0% to 99%
Advanced resistance to electromagnetic interferences
One touch automatic self installation
Only low voltage DC power within the gate structure
Standard Interfaces: RS-232, Bluetooth, Infrared
Interfaces available by field upgrade: Ethernet, USB

ISuperior Detection:
Capable of detecting the largest dynamic range of threat objects composed of magnetic, non-magnetic and mixed alloys
Certified to the Strictest Security Standards for weapons detection
60 pinpointing zones with high resolution & precision: 20 Vertical; 3 Lateral
Met-Identity for Identification of Threat Composition. PMD2 Plus is the world’s first metal detector with Met-Identity technology. Now you know where, how much and what type of metal is being brought into the secure area.

Unmatched Throughput:
Cutting edge discrimination technology allows personal effects to be ignored, creating rapid transit flow.
The Sweep Scan 4D Detection System provides a uniform inspection field, allowing more personal effects to be ignored.

Advanced Alarm Indication:
Four Multi-Zones Display Bars with each one programmable as Entry Stop/Go indication and/or Localization Lights.
Flexible Acoustic Alarm Signaling System: 10 Continuous and Pulsed Tones; 34 Special Sounds.
10 Acoustic Intensity Levels programmable from 0 up to 90 dBA at 1 m.
High Precision Transit Counter: In-Bound Transits Out-Bound Transits; Alarm Rate; Automatic Rescreening Compensation.

Over 40 built-in Security Programs:
Over 40 built-in Security Programs: Up to 22 International Standards; Up to 20 Customizable Levels.
Chip Card system for fast, simple and secure parameter changes (i.e. alarm volume and tone, counter reading etc...) and Security Level Selection.
Enhance any security standard with selectable random alarm probability.

10 minute Self Installation:
Industry Leader in Immunity against External Interferences.
One touch automatic self installation. PMD2 Plus is the most installable metal detector in the world. It goes from the box to fully operational in 10 minutes flat.
Continuous self diagnostics ensures consistent detection performance.

Breakthrough Value:
Enterprise Class features set at an entry level price.
Superior CEIA reliability slashes total cost of ownership.
Never requires calibration or scheduled maintenance. PMD2 Plus sets up fast and stays that way. There is zero scheduled maintenance and CEIA ’s world class quality and reliability are always included.

Modern Digital Electronics:
100% modern digital components for longer life and consistent performance.
Custom designed DSP analyzers allow unparalleled detection.External power supply means only low voltage exists in the metal detector producing the industry’s safest checkpoint.

Quality:
Continuous self diagnostic system
Proven reliability
No calibrations required
No scheduled maintenance
Fully digital design

Walk-Through gate structure:
State-of-the-art, compact washable panels and elliptical columns.
Protected against aging, weather and wear.

Central Control Unit:
Ergonomic and robust design.
High Visibility alphanumeric display and programming keyboard.
Made of advanced plastics (IP20 protection degree) or stainless steel (AISI 304 IP65 protection degree) and antivandalic construction.
Access to the front panel protected by hardware key and a levels of passwords.

Alarm signalling:
Visible signals:
Multi-zone display bar for “height on person” localization
4 light bars with software reversible direction and pacing indication
Green and red metering signals proportional to the mass of the object detected

Audible signals:
High acoustic intensity alarm signal
10 continuous and pulsed tone plus 34 special tones
10 sound intensities ranging from 0 to 90 dbA at 1m 

Type of signalling:
Visual: fixed or proportionate to the mass in transit - visible from 6m under lighting of 4000lux.
Visual wit h zonal subdivisions: Horizontal indication, via 3 distinct zones (left, center, right) for every height:total of 60 distinct zones (20 vertical zones x 3 horizontal zones).

Installation data:
Automatic synchronisation between two or more metal detectors with distance of down to 15 cm without the use of external cables.
Built-in floor sensitivity adjustment function.